Ace Skateboard Trucks 2023 | A Perfect Choice for Responsive Turning

In 2007, Steve “Shrewgy” Ruge and Joey Tershay founded ACE Trucks. Their shared objective was to develop the best-performing trucks skateboarding had ever seen. Between the two of them, they had a wealth of experience. This turned out to be easy to understand but a little more challenging to put into practice.

Through perseverance during its difficult formative years, ACE steadily assembled a strong team lineup that grew with the brand’s prominence over time. If you are looking for a perfect alternative of this brand then we recommend Krux Skateboard Trucks.

As the third-time partner in ACE, Joey Pulsifer was welcomed in 2017 and brought creative ideas to ACE to enhance the strength and functionality of the vehicles.

The strongest cast truck ever made was released by ACE in April 2021. This would later prove to be a turning point in the brand’s development reaffirming its status.

Quick View

History of Ace Skateboard Trucks

Joey Tershay established the business in San Francisco, California, in 2007. Ace was entirely managed and sold by Tershay and Ruge out of San Francisco until 2012.

Ace was sold by Diamond Supply Company, a Los Angeles-based retailer of skateboard hardware and accessories, from 2012 until 2016.

Ace Trucks Team

Ace trucks include a professional team. Their names are given below:

Vinnie Bahn
Jason Adams
Matt Rodriguez
Shota Kubo
Tim Rebensdorf
Philipe Dulude
Genesis Delagarza
Nick Boserio
Dane Brady
Brian Delatorre
Brad McClain
Max Palmer
Eli Reed
Tom Remillard
Kevin Rodrigues
Oskar “Oski” Rozenberg
Shin Sanbongi
Ronnie Sandoval
Raven Tershay
Jeff Grosso
Trey Wood
Hugo Boserup
Raul Navarro
Margielyn Didal
Evan Mock
Chris “Dune” Pastras
Marc Rison
Tom “Wally” Inouye
Sam Cunningham
Genki Sunagawa
Barker Barrett
Didrik “Deedz” Galasso
Sage Elsesser
Karl Berglind
Leon Chapdelaine
Eli Williams
Jason Salillas
Harry Lintell
Terrell Newell
Adam Hopkins
Donny Barley
Jamie Platt
Ville Wester
Kikuchi Taisei
Shogo Zama
Riley Boland
Jost Arens
Kenny Kopf
Dylan Righthand
Jake Reuter

Iterations in design:

V2 – The 44, 55, and 66 models have thicker hangers. “Rocker” was still present. Typical axle nuts.
V2.5 – The same as V2 with the addition of the. 38-inch “specials” axle nuts as standard equipment.
V3: Improved hanger on models 33, 44, 55, and 66. Typical axle nuts. softer bushings compared to previous versions. I got rid of “rocker”.

Design:

The ACE Skateboard trucks’ simple, almost basic form is striking. The only difference between the Independent and this Baseplate is the pivot, which has been moved further inside (towards the direction wheelbase).

According to appearances, the distinctive spherical hanger offers a lot of material and ensures longevity. The hanger of the ACE Skateboard trucks doesn’t taper from wheel to wheel, unlike those of other skateboard trucks. In order to provide the bearings more room and reduce friction, the hanger’s ends are conical around the axle.

Specifications:

When comparing ACE to other brands like Independent or Thunder, the technical data shows that ACE follows its own path.

The hanger and axle on the ACE 44 Classic truck are both 5.75 inches wide. It is suggested by the manufacturer for decks 8.5′′ to 8.125′′ wide. This places the truck between the 144s and 149s of Independent or the 148s and 149s of Thunder.

Performance:

The first session makes it very evident how precise the ACE Classic trucks’ maneuverability is. Extremely tight turns are no problem with these trucks, so it’s no surprise that pool skaters are big fans of them. Despite the fact that I don’t typically skate with loose trucks, I used the ACE 44 in its default configuration without tightening the kingpin nut.

But even on shaky landings, the trucks were steady at all times and a dependable ally. At first, grinds on flat surfaces, such as metal edges or curbs that resemble marble, felt a little “bumpy”. The “grainy surface” of the polished aluminum is noticeable. Anyway, the hanger is relatively smooth and grinds almost everything after a few grinds.

Ace Skateboard Truck Size Chart:

There are variant sizes of the Ace truck. Some of them in the form of table are given below:

TRUCK SIZE	SKATEBOARD DECK WIDTH
00	6.25 – 6.5
11	6.5 – 7.0
22	7.0 – 7.75
33	7.75 – 8.25
44	8.25 – 8.75
55	8.75 – 9.25
66	9.25 +

Conclusion:

I would have categorized Joey Tershay’s trucks as pool skateboarding prior to the ACE Skateboard Trucks evaluation. However, my viewpoint has significantly evolved, and I now consider the ACE 44 Classic 5.75′′ skateboard truck to be one of my favorites.

ACE Trucks and street skating complement one other very nicely. Team riders like Brian Delatorre, Dane Brady, and Kevin Rodrigues are examples of this. I suggest ACE Skateboard Trucks to anyone seeking an all-around vehicle who doesn’t worry about weight because of their remarkably fine steering behavior, longevity, and nearly non-existent break-in period.

FAQS:

Where do Ace Trucks come from?

The ‘world’s best skateboard trucks’ are their claim to fame at Ace, a skateboard truck business founded in Los Angeles by Steve Ruge and Joey Tershay.

Why are Ace Trucks so popular?

They turn quickly, last a long time, and grind well. The majority of individuals select their trucks based on the various brands available. Ace merely provides you with the best truck possible. No tricks.

How long have there been Ace Trucks?

In our skate test, you may discover all there is to know about ACE skateboard trucks. Joey Tershay created ACE Trucks in 2007.