Best Skateboard Bearings for Cruising 2024

To make cruising fast, every skateboard component must be connected together. These include the tiny, elliptical bearings required to connect the wheels to the axle. They normally come in conventional sizes to fit several manufacturers of wheels. Despite serving the same objective, some of them are faster and more stylish than others. The best skateboard bearings for cruising are in variety.

Ceramics or steel are typically used to make bearings. The latter is stiffer and less flexible. But ceramics bearings need less maintenance. Some use titanium to reduce overall weight and lengthen durability. 

To help you find the ideal fit, this analysis examines the top best skateboard bearings for cruising. By the end of this article, you will be able to decide, which bearing type is the best fit for you. 

Best cruiser skateboard bearings:

The best skateboard bearings for cruising are discussed below with their advantages and disadvantages.

Also Read: Best Skateboard Bearings

1. JDYYICZ Longboard Bearings:

Even when you are scrimping and saving to repair your worn-out bearings,   You should not have to compromise on quality. You could find the JDYYICZ longboard bearings to be the ideal fit. 

These are regarded as some of the best bearings for electric skateboards and are quite adaptable. Amazingly they moved so quickly. Even though I once owned a more expensive model, there is not much of a difference.

I bought them to replace the old ones in my rollerblades since I was so pleased with them. I have a thing for robust skateboard components. The fact that the bearings are still largely intact even after more than four months of operation, with the exception of some dust from soiled roads, shocked me.

These are solidly built. Additionally, they do not make any noise, thus there are no annoying skateboard noises during my trips.

2. Heady Shake Skateboard Bearings

Your thirst for speed will be more than satisfied by stronger and lighter cruiser board bearings. The Professional skateboard bearings from Heady Shake are everything you need. 

I’ve been using these bearings in three sets of roller skates every day and I adore them. They roll quite quickly and are very simple to clean.

These eight-pack bearings with four spacers that are pre-lubricated are incredibly smooth and quick. This set of quality bearings is the finest option if you want to upgrade.

These bearings are unequaled in terms of their usage flexibility. These fit longboards and kick scooters in addition to inline and roller skates. These bearings can resist the abuse of regular skating because of their excellent workmanship.

These bearings are trustworthy and long-lasting since they are made of pure titanium. Even on sharp turns, the gliding and turning seem effortless. When utilizing these on my board, I do not experience the drag I did with my prior bearings.

These are also incredibly quiet. They do not make any noise that could keep you from riding. These are good longboard/skateboard bearings with spacers.

3. Bones Reds Skateboard Bearings

The Bones Reds Bearings will be the first to fly off the shelves if there is a frenzied demand for reasonably priced yet performance-loaded bearings. These bearings are comparable to the far more expensive options offered by the company, which is one of the most well-known and popular companies in the US.

I tried to ride all of the packs I got for a reasonable amount of time using a variety of wheels and speed kits, but even after weeks of riding, they never appeared to roll cleanly and quickly.

Perhaps the excellent reports I’ve always heard about these bearings contributed to my high hopes. Although Bone’s other lines have received many positive reviews, I’m still willing to give them a try, but going forward, I’ll be less sure.

These skateboards for all types of skateboarders boast a combination of quality and performance and guarantee lightning-fast speeds.

These bearings have a detachable shield that makes cleaning a breeze, and that intrigued me as well. Every ride is silent and smooth because of the bearing’s reduced friction caused by the non-contact rubber coating. 

These are ideal for me because I am easily irritated by the noise that my boards make when they have inferior bearings.

4. Zealous Steel Bearings

Zealous bearings are regarded as the industry standard for all styles of skating, whether you enjoy downhill riding or just steady cruising. These bearings, which are available in sets of eight, combine price, speed, and durability features I took into consideration when making my purchase.

As soon as I looked at the product details, I was sold. Invest in these if you can.

I bought them since I ride a cruise board six miles to work every day. They take their time, according to some, and take a while to break in. This is false, as they have never become quicker or rolled more smoothly.

I’ve tried two pairs, and neither last longer nor wears out more quickly than other brands I’ve used. The pricing is the biggest plus.

Skateboard bearings, like other moving parts, require lubrication in order to function properly. I appreciate that the business lubricates these bearings with arch oil nanoceramic grease. 

This formulation ensures smoother rolling during cruising by assisting in the prevention of corrosion, distortion, and abrasiveness in the bearings.

Additionally, the substance aids in removing asperities to produce a surface that is practically frictionless. They provide smoother ride, last longer, and operate more efficiently.

5. Yellow Jacket Longboard Bearings

The best longboard bearings for cruising from Yellow Jacket weren’t hard to find. This high-precision is offered in a package of eight and comes with washers and spacers.

They should work with traditional skateboards, longboards, inline skates, and electric skateboards, in my opinion.

These bearings are, in my opinion, as good as they claim to be. Thar they are pre-lubricated is fantastic. I experienced the speed and smooth rolling in my 22-inch cruiser on my first ride with these.

I purchased these yellow jacket longboard bearings to replace my shortboard’s previous, worn-out bearings. They are decent bearings overall and roll easily. But, based on my personal experience, these bearings do not roll any better than Bones reds.

A week ago, I purchased some reds for my longboard in addition to these bearings. The idea was to put the reds in my shortboard and the yellow jackets in my longboard because yellow jackets are said to roll more quickly. They didn’t do. The Yellow jacket’s spin was substantially shorter than the red. 

I’m not sure why some people say they do. In my experience, they don’t, at least not always. Also, they make more noise. (The Reds)

They were so quiet even at high speeds, which is excellent because my older ones tended to the louder.

The bearings are made with top-notch technology and design. I enjoy how the variously colored etched colored seals provide defense from dirt and rocks. This feature also enables the bearings to keep their accuracy and increase their lifetime.

6. Bones Big Balls Bearings

The Bones family has recently expanded, which is fantastic news for skateboarders searching for precision bearings. Similar to the powerful Bones swiss bearings of the super swiss 6 kinds, this set contains eight bearings with 17 percent larger balls.

These roll more quickly than bearings with smaller balls as a result. These have a ridiculously fantastic performance. These bearings spin for a few moments longer than my previous ones.

Enabling me to travel farther with less effort. I always feel like I am cruising on ice while I am out riding the streets of my area because of its abundant lubrication.

Your bearings will eventually become dirty, but these are more resistant to dust. These are a fantastic match for someone like myself who despite frequently cleaning my entire board.

Larger balls continue to roll even on muddy roadways. I don’t believe I will require new bearings for a while. They are simple to clean, so even if I have to, I will choose this one. 

7. Bronson Speed Bearings

These skateboard bearings from Bronson speed combine attractive design with rapid speed. Traditional versions have a rubber barrier to protect the screen, but this business defied tradition.

These bearings shields are recessed deeply into the inner race edge to minimize oil leakage and dirt/moisture infiltration. While the removable shields allow for simple cleaning without causing any harm to the rubber shields or the races.

To boost the speed of your skate wheels, these bearings are also pre-lubricated with Bronson’s high-speed ceramic oil. 

These work well for technical and cruising street and park skating, and I can tell a difference when I ride my neighborhood’s tiny ramps. These moves quite quickly.

On my very first ride, I could tell a difference in how smoothly they spun. Every time I cruised, the audible speed technology, which amplifies the sound of speed, gave my board more personality.

According to my observation, the only noticeable difference during a ride is how silent it is. These bearings are a terrific upgrade because you can anticipate them to last longer. I particularly value the fact that these bearings undergo two manual inspections prior to rollout, indicating good quality.

8. Bones Ceramic Skateboard Bearings

The company has been established for almost three decades, and I was pleasantly surprised by its quality. These bearings are even more durable than their rivals because of the usage of the ceramic formulation.

This Bones Swiss Ceramics Bearings set is a wise choice if you want to experience the speed that elite bearings produce.

The Skate bearings made of ceramic will enable you to move quickly, travel further, and withstand dirt and moisture better than a typical bearing.

They do arrive pre-lubricated, and a nylon ball retainer is included to improve the speed and robustness of the bearing.

Even after daily use for the past three months, I still fly in these. They are lubricated with speed cream for a professional-level riding experience, so I don’t have to worry about slowing down.

I do not mind spending more for a top-tier pair of bearings for my longboard that offers unrivaled quality and performance. I immediately noticed a difference after installation. They roll incredibly easily. With these bearings, I can travel quickly and far.

9. KVENI Ceramic Bearings

KVENI bearings are top-rated in terms of material and application scope. These are constructed from chrome steel and ceramic balls, resulting in low friction.

They are non-magnetic, have limited thermal expansion, are typically low-density materials, and can operate without lubrication.

The dependability and adaptability of these bearings make me delighted with my purchase. They rolled easily and did not stop. These work with longboards, kick scooters, trikes, rollerblades, and inline skates in addition to cruisers. 

Advanced Chromes steel, and 608rs ceramic balls used to make the KVENI skateboard bearing. Precision 608RS ABEC 9 chrome steel rims, ceramic ball bearings that have been pre-lubricated with high-speed bearing oil, tough nylon retainers to take repeated blows, and detachable rubber metal shields for simple cleaning.

 For a new set of bearings, I did not want to spend a fortune. I was thrilled to discover this product for this reason. I may also purchase a new set of wheels for my eagerly anticipated update because it is reasonably priced. 

Additionally, the rubber seals on these bearings are distinctive blue in color and make them watertight while providing adequate defense against dirt, dust, and pebbles. I would think that these will linger with me for a while based on their build.

10. OldBoy Premium Ceramic Bearings

Ceramic bearings are regarded as worthwhile upgrades for all skateboarders because of their expectational quality and endurance. 

When you replace your old ones with excellent ceramic bearings from Oldboy, you get this. These bearings are made of polished glass balls and come in a pyramid box of eight.

They are pre-lubricated to reduce drag and wear and tear from regular cruising.

When I purchased this set of bearings, adaptability, and value for money were very important considerations because money is so tight these days. In addition to being ideal for cruiser boards, they are also suitable for inline, quad, hockey, and scooters.

These will undoubtedly outlast cheaper bearings from other companies, in my opinion. It was good to have my board equipped with bearings that allow more glide than pushing now that I have shifted from street skating to cruising, I noticed my cruiser accelerate faster.

How to Clean Skateboard bearings

Your bearing’s surface rusts as a result of exposure to the elements like water and dirt, and this is the main cause of the obnoxious noise they make while they spin.

The Wheels must first be taken off by removing the axle bolts using a wrench. The bearings and the rubber shield should then be taken off. Be extremely careful not to lose them, so make sure.

The bearings must then be immersed in a cleaning agent or solvent for a short period of time. It only takes five to fifteen minutes.

To remove the muck, you can also use an old toothbrush. Use only soapy water to clean the rubber shields to prevent blistering and needless wear and tear.

Start the engine after several minutes of letting the bearings air dry. The First is to apply one or two drops of your preferred lubricant equally to a bearing. Repeat this process for each of the seven bearings.

The cover shields and bearings must be installed once more as the final stage.

Conclusion

Well-made and capable of withstanding daily abuse from riding and cruising are characteristics of bearings from reputable brands. Instead of settling for less and jeoparidising the safety of your rides, it is a tiny thing to pay.

Make sure the bearings you purchase are of the highest calibre, whether you are purchasing steel or ceramic bearings. Just keep in mind that in order to maintain their efficiency over time, skateboard bearings must kept clean and properly lubricated.

Make sure to thoroughly research products online, including looking for the best skateboard bearings for cruising, before making a selection if you are set on purchasing new bearings for your cruiser board.

Hope your all queries about best skateboard bearings for cruising get cleared.

FAQs

How to install longboard/skateboard bearings?

You can install by following steps given steps:

Getting ready for mounting.

Inspecting the housing and shaft.

Unpacking

Installing the bearing.

Lubrication.

Equipment testing is being performed.

What are best longboard/skateboard bearings for cruising?

The best longboard/skateboard bearings for cruisings are:

• Bones Red Skateboard Bearings.
• Zealous Bearings for Longboards
• Bronson Speed Co
• Yellow Jacket Premium Bearings.
• Fireball Dragon Precision Bearings

What are the best bearings for cruising?

Swiss, titanium and ceramic bearings are the most widely used varieties.   Ceramic is a durable, light, weight material that resists heat and friction and is used to make bearings. They are frequently used by skaters who demand accuracy and high speeds. Switzerland is noted for its long lasting and smooth bearings.

Why good longboard/skateboard bearings with spacers used by skaters?

Skate bearings allow skate wheels to spin on skate axles by fitting into a skate wheels. Quality skate bearings are a crucial part of any skate setup, whether you are inline skating, skateboarding, or using roller skates.

When people set up their completes, the bearing spacer is crucial but frequently disregarded component. This problem is particularly common among beginners skaters and first time skateboard purchasers. By maintaining their parallel alignment in your wheels, these tiny metal “Cylinders” will assist your bearings.